Captains Log
A Day of Genaker Prep and IT Adventures
A day of installation of the Genaker and the Jockey Wheel
Installing the genaker and the jockey wheel. On a bright mid-October morning, we set out for the sailing club. We were armed with our new jib sock, a jockey wheel for the launching trolley, and our enthusiasm for boating. As we joined the club so the current IT guy is moving away. Paul and I met up with him at the boat club, exchanged IT history stories. Since no other volunteers had emerged had seen us promoted to looking after the Sailing Clubs IT at the next AGM in two weeks’ time. That done, Paul and I were ready to tackle the challenges ahead, both on and off the water.
Surprisingly good weather
Despite the country being swept by rain, we were fortunate to have fluffy blue clouds and occasional sunshine to accompany us. This day was all about Installing the Genaker and the Jockey wheel. Our first task was to get the boat ready, and we wasted no time.
Paul hoisted the boat up on its launch trolley, providing me the perfect opportunity to measure up and drill holes for the jack mount. With a new drill bit and a battery-powered drill, the process was swift and smooth. Soon the jack was installed, allowing the boat to be parked in a high position for effective water runoff.
The Genaker
Next on the agenda was the Gennaker sail, a task that proved to be more intricate. Plugs had to be removed, pulleys fitted, and various strange-looking devices installed. While Paul sorted through the fittings, I navigated the interior of the boat. I started removing plugs and trying to reach awkward spaces. A bolt slipped and vanished into the abyss of the centreboard mechanism, a small setback that resulted in a mental note to purchase replacements.
With a bit of ingenuity involving an oar, we managed to thread a rope through the sail chute. This task was made challenging by the length of the chute. But teamwork prevailed, and soon all the ropes were in place.
Merlin Rocket and the A-Rater
Curiosity led us to a Merlin Rocket, turned upside down, in the midst of restoration. The boat’s mahogany planks gleamed under the twelfth coat of varnish, a testament to the owner’s dedication. He shared with us another project, Dainty Too, a 1920’s A-Rater in dire need of repair. The hull, stripped to bare wood in places and riddled with holes of rotten wood, showcased the extensive work ahead. It would be a year or two before Dainty Too graced the waters again. However, the promise of its future glory was evident.
As we left the boat park, our roles as IT managers and sailors intertwining, we were reminded of the diverse skills and passions that the world of sailing brings together.
Next we make it to the AGM where Paul get elected to the committee
No comments:
Post a Comment