The first coat goes on Champagne — and the water marks are gone
The Winter Boat Shed | Philip Russell, PMR Sailing
The first thing I looked for when the varnish went on Champagne was a mark I could no longer see. For weeks, whenever I looked at the woodwork towards the bow of our Thames A-Rater, my eye went straight to those pale patches. Now I can follow the grain all the way through the place where they used to be. One coat in, and she already looks a different boat.
There are plenty more coats to come. In the meantime, one of Champagne’s rear runners has gone down to the Solent, and we’re gathering the ropes together to decide which ones need replacing. Of the three jobs, I know which one I’d put on the front of a Christmas card. Come our first race next season, I’ll be glad we attended to the other two as well.
The patch I used to look at first
Earlier in this winter series I wrote about the whitening towards the front of Champagne and why we wanted an experienced pair of eyes on it. Richard Stent, a cabinet maker who has restored Raters, took on the work of stripping back the old varnish. A photograph of Richard sitting inside Champagne captures a part of the job that a picture of gleaming timber can easily leave out. Somebody had to get in there and remove the old finish first.
What pleases me about the first coat is how much more of the boat I can see. The pale marks used to break the sweep of the grain into separate little sections. Take them out of the picture and your eye follows the curve of the bow. It’s one of those details that makes an A-Rater worth a second look, even tucked away in a lean-to in November.
If you’re photographing a similar job, pick a screw head or a joint that you can find again. Include it at the same edge of the frame before stripping, on the bare wood and after the first coat. Move slightly to one side if a bright reflection hides the patch. By spring you’ll have three pictures of exactly the bit of timber you were interested in. I’d happily put those beside the handsome photograph of the whole boat.
Why there are still several coats to go
The first coat gives the biggest change I can see from a few feet away. The next ones will be harder to tell apart in a photograph, but they’re part of building up the finish we want on Champagne. We plan to finish with a few coats of UV-stabilised Epifanes varnish. The woodwork looks lovely under cover now. I want to see it looking just as lovely when we bring her out into the daylight at Bourne End.
One small winter-shed habit I like is to write down the product, the area coated and the time each coat went on. “Did the bow on Saturday afternoon” is much more useful than trying to remember whether the shine you can see on Sunday morning is coat two or coat three. For sanding and recoating, the instructions for the exact varnish and the temperature in the shed are the things to go by. A free afternoon in the diary is only half of the arrangement.
A rear runner makes the trip to Swanwick
While Champagne stays under cover, her rear runner has gone off to Allspars, the rigging specialist at Swanwick Marina on the Solent. I’ve sent the existing runner so they can quote for making replacements. At this stage we’re waiting for a price.
Why send the actual item? Imagine trying to describe it over the telephone. You give a length. The person at the other end quite reasonably asks where you measured from. Then there’s the fitting at each end and the question of how it attaches on the boat. With the runner on the bench, the rigger can examine the assembly I’m talking about. A photograph of it fitted aboard gives the other half of the picture.
When the quotation comes back, I’ll want to be able to put it beside our winter list and answer three straightforward questions. How many runners does it cover? Which end fittings are included? When could the replacements be ready? That will give us something concrete to plan around while the varnishing continues.
Which ropes deserve a place back aboard?
We’re now gathering Champagne’s ropes together. A coil on the bench can look quite respectable while the short section that always sits in a cleat tells a different story. And once several similar coils are lying next to one another, “I’ll remember where that one goes” starts to sound rather optimistic.
I’d start each label with the job the rope does aboard Champagne. Colour can go on as a second clue. Then I’d uncoil one line at a time and give particular attention to the places where it meets a fitting. These are the sorts of entries I want in the notebook as we work through the pile.
| Line | Where I’d look closely | What I’d write down |
|---|---|---|
| Jib sheet | The section held in the cleat when the jib is trimmed | Which side it came from and whether the cover is worn at the usual gripping point |
| Halyard | The part that passes over the sheave with the sail fully hoisted | Distance from the sail end to any damaged patch, so we can trace it back to the fitting |
| Control line | The turn round a small block or through a fairlead | Where the line runs and whether it rubbed or felt stiff when adjusted last season |
Those are examples for the inspection. We’re still working out which of Champagne’s lines will go on the shopping list. If we do find concentrated wear, there’s a second job to pencil in alongside the replacement rope. Look at the fitting in the corresponding position. Otherwise we could spend good money on a new line and give it exactly the same hard life as its predecessor.
What I want to remember in spring
When we rig Champagne again, I’d like somebody to be able to pick up a coil and know where it goes. I’d like the runner quotation settled in good time. And when we push her out of the lean-to, I’m looking forward to seeing that bow in daylight.
For now, though, the first coat deserves its moment. I know where those water marks were. I can put my finger on the spot. What a pleasure to look there now and see the grain.

No comments:
Post a Comment